Turbosmart By Speedequipment

On this website you can find all Turbosmart products like Dumpvalves, Wastegates, Fuel Pressure Regulators,Turbo Actuators.

Wastegates & IWGs

A wastegate is a valve which controls the flow of exhaust gas from an engine to the turbocharger.

By controlling the flow of exhaust gas to the turbine of the turbocharger, the wastegate can control the boost pressure provided by the turbocharger to the engine.

The wastegate needs to be correctly sized for the engine and turbocharger combination to give the end user adequate control on boost pressure.

There are two types of wastegates: external wastegates, and actuator driven internal wastegates. 

IWG Actuator

An internal wastegate has the wastegate valve is built into the turbine housing.

The wastegate valve is controlled by an actuator which consists of a spring and a sealed chamber.

The sealed chamber of the actuator is connected to a pressure only source normally on the compressor cover of the turbocharger.

Internal wastegate  actuator turbosmart nederland belgie deutschland

External Wastgate

The most common reason for investing in an external wastegate is fitting an after-market turbo or better control of

the boost and consequently the power output of your engine. Additionally,

most large frame turbochargers are not equipped with internal wastegate systems.

Most tuners will recommend an external wastegate for any engine producing 400hp or more.

External wastegate turbosmart belgie nedeland deutschland

Below you find a small part of the available Blow off Valves , rest you can find in the 2017 download catalog and in the pricelist

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------


TS-0501-1101

WG38 Ultragate 38 7psi Blue TS-0501-1101 The Turbosmart Ultra-Gate38 is a 38mm external wastegate for street and racing applications, specifically for classic 2 bolt flanges (71mm spacing). Designed with minimum size and maximum flow in mind, the new Ultra-Gate38 is smaller and lighter than previous models & features Turbosmart's unique locking collar design for quick and easy spring changes (3psi - 26psi option avaialble). Features a one-piece Stainless Steel Valve for maximum reliability and our proven Silicon Nomex Diaphragm.

TS-0501-1102

WG38 Ultragate 38 7psi Black TS-0501-1102 The Turbosmart Ultra-Gate38 is a 38mm external wastegate for street and racing applications, specifically for classic 2 bolt flanges (71mm spacing). Designed with minimum size and maximum flow in mind, the new Ultra-Gate38 is smaller and lighter than previous models & features Turbosmart's unique locking collar design for quick and easy spring changes (3psi - 26psi option avaialble). Features a one-piece Stainless Steel Valve for maximum reliability and our proven Silicon Nomex Diaphragm.

TS-0501-1201

WG38HP Ultra-Gate38 HP 35psi Blue TS-0501-1201 The highest pressure external wastegate of its kind in the world. The Ultra-Gate38HP retains the compactness and lightness synonymous with Turbosmart wastegates, specifically for classic 2 bolt flanges (71mm spacing) and the added bonus of being capable of handling high boost pressures. Only 28mm taller than the standard Ultra-Gate38 these wastegates are ideal for all high boost applications. Utilizing our Locking Collar for quick and easy springs changes (Options from 10 to 40psi available). Features a one-piece Stainless Steel Valve for maximum reliability and our proven Silicon Nomex Diaphragm.

TS-0501-1202

WG38HP Ultra-Gate38 HP 35psi Black TS-0501-1202 The highest pressure external wastegate of its kind in the world. The Ultra-Gate38HP retains the compactness and lightness synonymous with Turbosmart wastegates, specifically for classic 2 bolt flanges (71mm spacing) and the added bonus of being capable of handling high boost pressures. Only 28mm taller than the standard Ultra-Gate38 these wastegates are ideal for all high boost applications. Utilizing our Locking Collar for quick and easy springs changes (Options from 10 to 40psi available). Features a one-piece Stainless Steel Valve for maximum reliability and our proven Silicon Nomex Diaphragm.

TS-0505-1005

WG40 Compgate 40mm - 7 PSI BLUE TS-0505-1005 Turbosmart's Comp-Gate40 (40mm) external wastegate was designed to fit into tight engine bays while still offering superior flow and heat handling capabilities. The revolutionary actuator housing is 25% smaller than previous designs and allows for easy spring changes (from 3psi to 26psi available) with our locking cap design and gives the ability to index the cap orientation in 12 different positions. Features Solid 1 Piece Coated Stainless Steel Valve and Silicon Nomex Diaphragm for true reliability and performance.Supplied With: Springs, Inlet and outlet Weld Flanges, Inlet and outlet V-Band clamps, Valve seat, 2 x 1/16th blanking plugs, 2 x 1/16th Vacuum nipples, Locking Ring removal tool.

TS-0505-1006

WG40 Compgate 40mm - 7 PSI BLACK TS-0505-1006 Turbosmart's Comp-Gate40 (40mm) external wastegate was designed to fit into tight engine bays while still offering superior flow and heat handling capabilities. The revolutionary actuator housing is 25% smaller than previous designs and allows for easy spring changes (from 3psi to 26psi available) with our locking cap design and gives the ability to index the cap orientation in 12 different positions. Features Solid 1 Piece Coated Stainless Steel Valve and Silicon Nomex Diaphragm for true reliability and performance.Supplied With: Springs, Inlet and outlet Weld Flanges, Inlet and outlet V-Band clamps, Valve seat, 2 x 1/16th blanking plugs, 2 x 1/16th Vacuum nipples, Locking Ring removal tool.

TS-0505-1009

WG40 Compgate 40mm - 14 PSI BLUE TS-0505-1009 Turbosmart's Comp-Gate40 (40mm) external wastegate was designed to fit into tight engine bays while still offering superior flow and heat handling capabilities. The revolutionary actuator housing is 25% smaller than previous designs and allows for easy spring changes (from 3psi to 26psi available) with our locking cap design and gives the ability to index the cap orientation in 12 different positions. Features Solid 1 Piece Coated Stainless Steel Valve and Silicon Nomex Diaphragm for true reliability and performance.Supplied With: Springs, Inlet and outlet Weld Flanges, Inlet and outlet V-Band clamps, Valve seat, 2 x 1/16th blanking plugs, 2 x 1/16th Vacuum nipples, Locking Ring removal tool.

TS-0505-1010

WG40 Compgate 40mm - 14 PSI BLACK TS-0505-1010 Turbosmart's Comp-Gate40 (40mm) external wastegate was designed to fit into tight engine bays while still offering superior flow and heat handling capabilities. The revolutionary actuator housing is 25% smaller than previous designs and allows for easy spring changes (from 3psi to 26psi available) with our locking cap design and gives the ability to index the cap orientation in 12 different positions. Features Solid 1 Piece Coated Stainless Steel Valve and Silicon Nomex Diaphragm for true reliability and performance.Supplied With: Springs, Inlet and outlet Weld Flanges, Inlet and outlet V-Band clamps, Valve seat, 2 x 1/16th blanking plugs, 2 x 1/16th Vacuum nipples, Locking Ring removal tool.

TS-0505-1201

WG40HP Compgate 40mm - 35PSI BLUE TS-0505-1201 The highest pressure external wastegate of its kind in the world. The Turbosmart Comp-Gate40HP (40mm) External Wastegate retains the compactness and lightness synonymous with Turbosmart wastegates with the added bonus of being capable of handling high boost pressures. Only 28mm taller than the standard Comp-Gate40 these wastegates are available in base pressures frm 10psi to 40 psi and include our proven solid 1 piece coated stainless steel valve and high temperature tolerant silicon Nomex Diahpragm for proven performance and reliability.

TS-0505-1202

WG40HP Compgate 40mm - 35 PSI BLACK TS-0505-1202 The highest pressure external wastegate of its kind in the world. The Turbosmart Comp-Gate40HP (40mm) External Wastegate retains the compactness and lightness synonymous with Turbosmart wastegates with the added bonus of being capable of handling high boost pressures. Only 28mm taller than the standard Comp-Gate40 these wastegates are available in base pressures frm 10psi to 40 psi and include our proven solid 1 piece coated stainless steel valve and high temperature tolerant silicon Nomex Diahpragm for proven performance and reliability.

TS-0505-2010

WG 35 PSI Conversion Kit Blue TS-0505-2010 Conversion Kit - Suit Turbosmart Ultra-Gate38 (38mm), Comp-Gate40 (40mm) and Hyper-Gate45 (45mm) External Wastegates. Provides an Upgrades top cap to allow base pressure springs of up to 40psi. Inclues springs of 35 PSI base pressure in the kit and all accesories to convert your existing WG38, WG40 or WG45 to a HP Gate quickly and easily.

TS-0506-1001

WG45 Hypergate 45 7psi Blue TS-0506-1001 The Turbosmart Hyper-Gate45 is a 45mm external wastegate designed with minimum size and maximum flow in mind. Smaller and lighter than the previous model, the new Hyper-Gate45 features a unique locking collar design for reduced size and quicker spring changes. (Options from 3psi to 26psi available). Features Solid 1 Piece coated Stainless Steel Valve and silicon nomex diaphragm proven for performance and reliability.

TS-0506-1002

WG45 Hypergate 45 7psi Black TS-0506-1002 The Turbosmart Hyper-Gate45 is a 45mm external wastegate designed with minimum size and maximum flow in mind. Smaller and lighter than the previous model, the new Hyper-Gate45 features a unique locking collar design for reduced size and quicker spring changes. (Options from 3psi to 26psi available). Features Solid 1 Piece coated Stainless Steel Valve and silicon nomex diaphragm proven for performance and reliability.

TS-0502-1040

WG50 Pro-Gate 50 14psi Blue TS-0502-1040 Turbosmart 50mm Pro-Gate50 external wastegate. Combining a compact body, superior flow and industry leading temperature resistanc, the Pro-Gate50 is a market leader for reliability and performance. Solid one-piece Coated Stainless Steel Valve and shielded silicon nomex diaphragm ensures excellent heat handling capabilities. Various Base Pressures can be easily achieved from 5psi to 33psi.

TS-0502-1002

WG50 Pro-Gate 50 7psi Black TS-0502-1002 Turbosmart 50mm Pro-Gate50 external wastegate. Combining a compact body, superior flow and industry leading temperature resistanc, the Pro-Gate50 is a market leader for reliability and performance. Solid one-piece Coated Stainless Steel Valve and shielded silicon nomex diaphragm ensures excellent heat handling capabilities. Various Base Pressures can be easily achieved from 5psi to 33psi.

TS-0503-1001 Powergate 60

WG60 Power-Gate60 7psi Blue TS-0503-1001 Turbosmart Power-Gate60 (60mm) External Wastegate. With a superior flow path and high temperature resistance the Power-Gate60 is a market leader in its sector, outperforming all similarly sized wastegates. The shielded diaphragm housing ensures excellent heat handling capabilities. Features Solid one-piece Coated Stainless Steel Valve and the flexibility of a range of setups (5psi to 33psi) base pressure.

Sensor Caps Wouldn't it be great to actually know what is happening inside your wastegate? Now you can! With the Turbosmart Wastegate Sensor Cap you can “see” into the wastegate, so there is no need to guess anymore. You can log the wastegate valve position and know exactly what it is doing in relation to other engine operating conditions. For example, can see at X RPM, your valve lifts Y much, which results in Z boost pressure. No uncertainty, just hard data. The Turbosmart Wastegate Sensor Cap: • Is the first of its kind on the market • Allows the user to install a valve position sensor to their standard Turbosmart 'gate by only changing the cap. • Is compatible with a wide range of popular data loggers (MoTec, RacePak, AIM, etc) • Utilises a simple 0-5 Volt sensor found in many auto parts store (or available directly from Turbosmart) • Is an off the shelf item, available for all current Turbosmart wastegate sizes: 38mm, 40mm, 45mm, 50mm, and 60mm

TS-0622-1122

IWG75 Ford XR6 Actuator 12PSI TS-0622-1122 Ford XR6 Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the XR6 IWG is easy to install and requires no special tools or fabrication. It can’t get any easier! Stainless steel rods and connecting clevis for corrosion resistance. Ideal for use with any Turbosmart boost controller. Supplied With: Fitting Hardware, 6.3mm Clevis end and Nut, Brown/Grey 5psi Inner Spring and Brown/Purple 7psi Middle Spring (installed).

TS-0622-4052

IWG75 Ford F150 Ecoboost (2011-2012) Black 5 PSI TS-0622-4052 Ford F150 Ecoboost Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the Ecoboost IWG is easy to install and requires no special tools or fabrication. We've taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator.

TS-0622-7072

IWG75 Ford Fiesta ST 1.6L Ecoboost Black 7PSI TS-0622-7072 Turbosmart’s ever popular internal wastegate actuator range is expanding again, with the inclusion of a new unit designed specifically for the Ford Fiesta ST. The Turbosmart wastegate actuator range has been designed as a stronger, more reliable replacement for OEM parts. Like all Turbosmart parts, billet construction means they are stronger and more durable than a stock actuator, while Turbosmart’s focus on performance means boost comes on faster and holds on longer.

TS-0622-2072

IWG75 Ford Focus ST/XR5 2.5L Turbo 7 PSI TS-0622-2072 Ford Focus ST/XR5 2.5L Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the ST/XR5 IWG is easy to install and requires no special tools or fabrication. We've taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator.

TS-0622-3072

IWG75 - Ford Focus RS Mk1 2.0T - 7 PSI TS-0622-3072 Ford Focus RS Mk1 2.0L Turbo Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the Focus RS IWG is easy to install and requires no special tools or fabrication. We've taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator.

T-0622-5072

IWG75 Ford Focus ST 2.0L Ecoboost 7 PSI TS-0622-5072 Ford Focus ST 2.0L Ecoboost Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the ecoboost IWG is easy to install and requires no special tools or fabrication. We've taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator.

TS-0622-9122

IWG-75 - Ford Focus RS 2.3 EcoBoost - 12PSI TS-0622-9122 Turbosmart's replacement IWG-75 Internal Wastegate Actuator for the Mk3 Ford Focus RS 2.3 EcoBoost offers significant performance gains, with faster boost build up, less drop off at the top end and more power throughout the rev range, due to its improved boost control compared to the standard actuator.

TS-0601-1242

IWG75 Mitsubishi EVO 6-8 24 PSI Black TS-0601-1242 Mitsubishi Evo Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the Mitsubishi Evo IWG is easy to install and requires no special tools or fabrication. We've taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator.

TS-0601-2142 evo 9

IWG75 Mitsubishi EVO 9 14 PSI Black TS-0601-2142 Mitsubishi Evo Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the Mitsubishi Evo IWG is easy to install and requires no special tools or fabrication. We've taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator.

TS-0601-3242

IWG75 Mitsubishi EVO 10 24 PSI Black TS-0601-3242 Mitsubishi Evo Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the Mitsubishi Evo IWG is easy to install and requires no special tools or fabrication. We've taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator.

TS-0615-2242 Nissan Gtr

IWG75 Nissan GTR R35 Black 24PSI TS-0615-2242 Nissan R35 GT-R Internal Wastegate Kit includes two Internal Wastegate Actuators (IWGs) to provide better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory parts, Nissan R35 GT-R Internal Wastegate Kit is easy to install and requires no special tools or fabrication. We've taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator.

Nissan GTR R35 IWG movie

TS-0615-3142 Nissan Juke 1.6 Turbo

IWG-75 - Nissan Pulsar/Juke 1.6T - 14PSI TS-0615-3142 The IWG-75 Internal Wastegate Actuator for the Nissan Juke and Pulsar 1.6T is a direct replacement for the standard wastegate actuator, and offers significantly improved performance and durability. With an internal spring pressure of 14PSI, the IWG-75 is ideal for tuned vehicles, and offers more stable boost control, resulting in less wasted boost, quicker turbo spool and less boost drop off at the top of the rev range compared to the standard 'tin can' actuator.

TS-0615-4072 Nissan Patrol

IWG-75 - Nissan Patrol ZD30DDTi - 7PSI TS-0615-4072 Upgraded Internal Wastegate Actuator for Nissan ZD30DDTi engines - offers dramatically improved boost control and removes the mid range boost drop caused by the OEM actuator, allowing the engine to reach its full potential.

TS-0624-1242 Porsche

IWG75 Porsche 993 911 Turbo Black 24PSI TS-0624-1242 The Porsche 993 Turbo Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the Porsche IWG is easy to install and requires no special tools or fabrication. We've taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator.

Turbosmart Internal Wastegate for Porsche 993 Turbo

TS-0624-2072 Porsche 996 turbo

IWG75 Porsche 996 911 GT2 Black 7PSI TS-0624-2072 The Porsche 996 GT2 Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the Porsche IWG is easy to install and requires no special tools or fabrication. We've taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator.

TS-0605-1072 Subaru speedequipment

IWG75 Subaru WRX 2009 - 2014/WRX STI 04 - Current 7 PSI Black TS-0605-1072 Subaru WRX STi Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the Subaru WRX STi IWG is easy to install and requires no special tools or fabrication. We've taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator.

Turbosmart Internal Wastegate for Subaru WRX STI

TS-0605-2052

IWG75 Subaru Impreza WRX 08 5 PSI Black TS-0605-2052 Subaru WRX 2008 Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the Subaru WRX 2008 IWG is easy to install and requires no special tools or fabrication. We've taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator.

Turbosmart Internal Wastegate for Subaru WRX STI 

TS-0605-3072 subaru speedequipment

IWG75 Subaru WRX MY15 7PSI TS-0605-3072 Turbosmart's IWG-75 Internal Wastegate The Subaru WRX has long been an icon of the turbocharged performance car world. The latest WRX continues the tradition with its powerful and charismatic 2.0-litre turbo Boxer engine and trademark all-wheel-drive. Turbosmart is committed to offering the best products to enhance the performance of this evergreen sports sedan. The IWG-75 Internal Wastegate Actuator is the latest addition to Turbosmart's range of products designed specifically for the 2015 WRX and WRX STi. Turbosmart's IWG-75 Internal Wastegate Actuator allows more precise control over the flow of exhaust gas to the turbocharger compared to the stock actuator, creating a flatter, more stable boost curve with less drop off at the end of the rev range. The result is a more drivable car with better turbo response, smoother power delivery and less lag. Turbosmart's Internal Wastegate Actuator can cope with the high stresses and temperatures of high boost applications for prolonged periods of time, and is highly customisable with interchangeable springs for a range of boost levels. Stock actuators can struggle to cope with the pressures of increased boost, so the IWG-75 is a must for the WRX enthusiast looking for more power while avoiding damaging boost spikes. Actuator allows more precise control over the flow of exhaust gas to the turbocharger compared to the stock actuator, creating a flatter, more stable boost curve with less drop off at the end of the rev range. The result is a more drivable car with better turbo response, smoother power delivery and less lag.

IWG-75 - Subaru WRX 1997-2007 TD04 - 7PSI TS-0605-5072 Turbosmart's high-performance replacement Internal Wastegate Actuator for 1997-2007 WRX models fitted with the TD04 turbo is designed to get better boost response from the WRX's standard turbo, for those who wish to avoid the cost of an aftermarket turbocharger.

TS-0645-1052 Vag Actuator

IWG75 VAG K04 Variant - Black 5PSI TS-0645-1052 The Turbosmart VAG wastegate actuator range has been designed as a stronger, more reliable replacement for OEM parts. Like all Turbosmart parts, billet construction means they are stronger and more durable than a stock actuator, while Turbosmart’s focus on performance means boost comes on faster and holds on longer.

TS-0645-2052

IWG75 VAG K03 Variant - Black 5PSI TS-0645-2052 The Turbosmart VAG wastegate actuator range has been designed as a stronger, more reliable replacement for OEM parts. Like all Turbosmart parts, billet construction means they are stronger and more durable than a stock actuator, while Turbosmart’s focus on performance means boost comes on faster and holds on longer.

TS-0623-1072 renault clio rs

IWG-75 - Renault Clio RS 1.6T - 7PSI TS-0623-1072 Turbosmart's IWG-75 for the Clio RS is performance-focused: it has stiffer actuator springs and a larger diaphragm, which helps the wastegate stay closed when it should - meaning boost builds earlier in the rev range and hold on right until redline.